NC Press Brake EASYCAT TP10S System Manual

The

NC Press Brake EASYCAT TP10S is a reliable, cost-effective 10.1-inch full-color touchscreen CNC system developed specifically for Wuxi Isket WC67K-series torsion-bar synchronized hydraulic press brakes (40–400 Ton, 1.6–6 m length). It delivers ±0.05 mm repeatability through proven torsion-bar + dual-servo backgauge technology and is widely used for stainless steel, aluminum, mild steel, and galvanized sheet fabrication in electrical cabinets, automotive parts, kitchen equipment, and general sheet metal workshops. Key Advantages.

10.1″ TFT 256K color touchscreen (Chinese/English)

Standard 4+1 axes (Y1-Y2-X-R + torsion sync), expandable to 6+1
Fast servo X-axis (faster than most E21/DA41T systems)
220 programs × 24 steps, angle programming with automatic Y-depth calculation
USB program transfer & optional angle measuring interface
2. Safety First – Mandatory Regulations

Always enable light curtain/laser guard

Never exceed rated tonnage by >20 %
Check torsion-bar lubrication and oil temperature (<50 °C) daily
Use proper die clamping tools – keep hands clear
Emergency stop + CE-certified safety relay
3. Daily Startup & Homing Procedure

1.Power on: Main → Control → Pump (5 s delay)

2.Wait for self-check (≈30 s)
3.Press “REF” → Home Y → X → R → “REF OK” green light
4.Set units, language, and password (default 0000)
4. Interface Quick Guide

Top: Mode & alarm status

Left: Real-time axis positions
Center: Program list / basic simulation
Right: Quick icons (Program, Tools, Parameters, Diagnostics)
5. Manual Mode Operation

Fast down → Auto slow → Bending → Return

Y1-Y2 sync correction button (auto torque balance)
X/R backgauge jog control
6. Tooling & Material Library

Store up to 50 die sets

Auto collision detection (minimum flange calculator)
20+ materials with automatic tonnage & spring-back calculation
7. Programming (Simple & Fast)

1.Touch “P” → New Program

2.Input bend length (L) + angle (α) → System auto-calculates Y depth & X position
3.Add retraction, dwell time
4.Simulate → Save → Run
8. Automatic Running & Advanced Features