CALL US TODAY! [email protected] | +86 15975519810
Hybrid Servo Press Brake
Advanced Electro-Hybrid CNC Press Brake 4-8 Axis
Automatically realize the sliding depth control, the sliding left and right tilt adjustment, the back gauge back and forth adjustment, the left and right adjustment, the pressure tonnage adjustment and the slider approaching speed adjustment, etc. The bending machine can easily realize the slide down, jog, continuous, pressure holding, return and halfway stop actions, and the same angle or different angles of multiple elbows can be bent at one time.
Stress Analysis & Finite Element Analysis
Integral steel welded structure, vibration eliminate stress, high mechanical strength, good rigidity. Hydraulic up- ward transmission. The frame is processed by CNC floor boring and milling machine to ensure the parallelism and perpendicularity of each mounting surface.
ESTUN MAIN SERVO MOTOR
Power consumption is 50% less than conventional motor systems. Increase productivity by 30% (reduce cycle time). More accurate positioning. Low noise, quieter work. Hydraulic fluid use is less, only 40% of the traditional. Easier to debug and easier to maintain.
GERMANY BOSCH-REXROTH
PROPORTIONAL VALVE(CLOSE LOOP)
It can realize stepless adjustment of pressure and speed. Avoid the impact phenomenon when the normally open on/off valve changes direction. Can realize remote control and program control. Compared with intermittent control, the system is simplified and has significantly fewer components. The closed-loop control can effectively suppress the interference ability and improve the response characteristics of the system.
HYTEK-USA SUNNY GEAR OIL PUMP
Axial and radial pressure compensation designs maintain high volumetric efficiency even at low speeds and viscosity. Ultra-low noise, high strength cast iron and unique internal silencer design, so that the noise is lower. Small fluctuation of flow and pressure, stable flow and pressure out-put can be maintained at low speed. Wide range of speed, the highest speed up to 3600r/min. Good oil absorption characteristics. Not sensitive to oil pollution, long service life. Compact structure.
SPANISH FAGOR -GRATING RULER
Detection of linear and angular displacement
Large detection range
High detection accuracy
Fast response
ELECTRIC MOTORIZED CROWNING
The worktable is equipped with a deflection compensation mechanism to compensate the deformation of the worktable and slider and ensure the accuracy of workpiece. The main adjustment method is that the user input a value to the CNC system according to the actual workpiece angle error, and the CNC system will automatically adjust the compensation amount (i.e. adjust the preconvex amount).
SCHNEIDER FRANCE
ELECTRIC SYSTEM
Stable quality, high technical content. It has the function of frequency converter. Power supply is safer and more reliable, fully automated, energy saving and synergistic effect is more obvious. Long-term strategic solutions to support maintenance of major brands around the world.
BACKGAUGE
Adopted Taiwan Hawking ball screw and linear guide to mute the speed quickly, to ensure that the X-axis movement is more accurate than using the rod. The rear stopper adopts synchronous belt pulley mechanism, X and Y axis double servo AC motor to ensure accuracy, R axis system control automatic lifting. The height of the rear backgauge finger can be manually adjusted. There are four backgauge fingers for positioning.
OIL CYLINDER
System can control the Y1 and Y2 axes (Y1 controls the left cylinder and Y2 controls the right cylinder) To ensure the synchronous movement of the slider
FAST CLAMP
Standard equiped fast clamp, can be changed in a very short time. Convenient and time-saving. Fast loading and unloading function, improve work efficiency.
FRONT SUPPORT
In the process of completing the bending procedure, the plate needs to be placed on the front supporting device. In order to ensure the bending accuracy,the plate needs to be assisted in the positioning during the bending process, and then the plate is sent to the correct station for bending meanwhile saving manpower.
PUNCH & DIE
In the process of completing the bending procedure, plate needs to be placed on the front supporting device. In order to ensure the bending accuracy,the plate needs to be assist- ed in the positioning during the bending process, and then the plate is sent to the correct station for bending mean- while savingmanpower.
CONTROL SYSTEM
NETHERLAND DELEM DA53T(STANDARD)
“Hot-key” touch navigation
10.1″ high resolution colour TFTUp to
4 axes (Y1,Y2+2 aux. axes)
Crowning control
Tool/material /product library
Servo and frequency inverter control
Advanced Y-axis control algorithms for closed-loop as well as open-loop valves.
TandemLink (option)USB memory stick interfacing
Profile-T offline software
OPTIONAL SYSTEM
Provide all kinds of controller on the market for selection
DELEM DA69T
DA-Touch 3D modular press brake control
CYBELEC CT12PS
Intended specifically for synchronized press-brakes.
ESA 640
A single CNC for all applications. An Esautomotion exclusivity.
OPTIONAL CONFIGURATION
BACKGAUGE AXIS
We are provided to equip with a backgauge constituted by a solid structure in order to assure the best repetitiveness and high precision in axes positioning.
LASER SAFETY
DSP laser safety protection device fully protects the personal safety of the bending machine operator, avoiding the danger caused by the rapid movement of the slide on the machine tool. A blocky protection area is formed for the tip of the curved knife to protect the front, middle and back areas of the tip. The protection area is fixed below the tool tip and moves with the die to ensure that any object under the die at high speed must enter the protection area generated by DSP before contacting the tool tip. Once an occluder (such as worker’s finger) enters the DSP protected area, DSP will immediately send a signal and interrupt the downward action of the slider.
BENDING FOLLOWER
Sheet supporting plate can follow the workpiece during the bending. The following degree and speed are controlled by CNCcontroller. Bending-help device can move along linear guide left and right.The height can be adjusted up and down manually, also the device can move front and rear to match the die opening manually. Two choices for supporting table: Brush and stainless tube. The bending help device can be controlled to work simultaneously or independently.
Contact CAMT
R&D production and sales sheet metal equipment, main products inculding CNC PRESS BRAKE, CNC SHEARING MACHINE,FIBER LASER CUTTING MACHINE, all kinds machinery parts & accessories and so on , the products and services throughout the world.
E:[email protected] | [email protected]| M:+86 15975519810